Easy, Affordable Financing Available Now!
Apply NowExmark STE600CKA363H1
Staris E-Series STE600CKA363H1
Available with a choice of 32- or 36-inch UltraCut Series 3 cutting decks, Staris E-Series commercial stand-on mower strike the perfect balance of productivity and value. The compact size of the 32-inch model allows it to fit through 36-inch gates and into tight spaces - a must for commercial mowing. A top ground speed... + Read More
Features
Cut Quality
The Staris E-Series features proven UltraCut Series 3 decks delivering Exmark's signature quality of cut.
Drive System
The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
Serviceability
The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.
Commercial-Grade Engine
Kawasaki commercial-grade engines are featured on the Staris E-Series.
Compact Design
The compact size reduces trailer space and storage and gives the ability to access more yards, more quickly, while providing exceptional maneuverability on tough terrain.
Specs
| Model | STE600CKA363H1 |
| Equipment | |
| Tractor Frame | Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control | Twin levers with adjustable front reference bar to modify forward ground speed. |
| Front Caster Tires | 9 x 4.50-5, smooth-tread, semipneumatic tires with sealed ball bearings. |
| Drive Tires | 21x7.00-10 Kenda K505 |
| Parking Brake | Lever-actuated bar brake. |
| Blade Spindles | No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical | 12-volt battery with 15-amp alternator. |
| Cup Holder | No |
| Casters | .38 thick caster yoke arms with sealed ball bearings |
| Standard Features | Engine Hour Meter |
| UPC | UPC193308207636 |
| Power Components | |
| Engine Brand | Kawasaki |
| Engine Model | FS600V |
| Fuel System | Carbureted |
| Engine Series | V-Twin |
| Engine Speed | 3,600 rpm |
| Engine Displacement | 603 |
| Air Filter | Standard Engine Manufacturer's air filter |
| Drive System | Hydro-Drive |
| Drive Description | Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. |
| Speed | Infinitely variable speed selection 0-7.5 mph (12.1 kmph) forward, 0-4.0 mph (6.4 kmph) reverse |
| PTO Engagement | Warner 105 ft-lb clutch |
| Fuel Capacity | 5-gallon (18.9-L), single fuel tank with single fill location. |
| Fuel Indicator | Yes - Float Gauge |
| Drive Wheel Release | Allows unit movement without engine running. |
| Safety Package | Operator Presence Controls (OPC) with safety interlock system indicators |
| Deck Lift | Single point HOC |
| Carb Compliant | NO |
| Fuel Type | Gas Carbureted |
| Engine Spec | _S36 |
| Decks | |
| Deck Construction | 7-gauge top that is formed and continuously seam welded, 7-gauge side skirt |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 3. Side discharge standard, with flexible discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 36" |
| Cutting Heights | 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.50" (1.27 cm) increments |
| Blades | 2 Blades at 18.00" Length |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Dimensions | |
| Width / Cutting Deck | 48 in. |
| Length | 58.103 in. |
| Height | 47.3 in. |
| Curb Weight | 779 lbs. |
Accessories and Attachments
Strobe Light Kit
LED Light Kit
Micro-Mulch System
MULCH KIT 32"
12-Volt Power Port
Accessory Adapter Kit
Adapter for OCD & 3-Bushel Bagger (Series 3)
3-Bushel Bagger
Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. Adapter kit required for select models.
Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
Hydro Maintenance Kit
Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
Operator Controlled Discharge (Hand)
OCD STARIS E
Trash Container
TRASH CONTAINER
Copyright © 2024 - All Rights Reserved - EquipmentLocator.com