Easy, Affordable Financing Available Now!
Apply NowExmark LZX980EKC96RW0
Lazer Z X-Series EFI LZX980EKC96RW0
And with our top-of-the-line Lazer Z EFI X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED Technology which help boost fuel efficiency. T... + Read More
Features
Eco-Friendly
Reduces fuel consumption, fewer emissions and carbon footprint.
Fuel Savings
Delivers up to 25% in fuel savings.
Reduce Green House Gases
Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Easy to Start
Easy start in any altitude or climate condition (no manual choke).
Engine Efficiency
Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Sequential Fuel Injection
Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
Specs
| Model | LZX980EKC96RW0 |
| Equipment | |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30 mm (1.18") diameter spindle shaft and splined blade driver. |
| Drive Tires | 24 x 12.0-12, 4 ply Turf Master® |
| Tractor Frame | Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires | 13 x 6.5-6, smooth-tread, semi-pneumatic. |
| Parking Brake | Lever-actuated disc brake. |
| Seat | Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Electrical | 12-volt battery with 15-amp alternator. |
| Standard Features | Engine hour meter and cup holder |
| UPC | 1.93308E+11 |
| Power Components | |
| Engine Brand | Kohler |
| Engine Model | ECV980 |
| Engine Displacement | 999 |
| Engine Series | Command Pro™ EFI |
| Engine Speed | 3,650 RPM |
| Air Filter | Heavy-duty canister air filtration system |
| Fuel Type | Gas EFI |
| Fuel Capacity | 12-gallon (45.4-L), single fuel tank with single fill location. |
| Fuel Indicator | Yes - electronic Sender |
| Drive | Hydro-Drive |
| Drive Description | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors. |
| Engine | 38 hp* |
| Speed | Infinitely variable speed selection from 0-10.5 mph (16.8 kmph) forward, 0-7.0 mph (11.3 kmph) reverse |
| Carb Compliant | No |
| Deck Lift | Electric over hydraulic push button control |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop electromagnetic 250-ft-lb clutch with spot brake |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .50" thick caster yoke arms. |
| Engine Spec | 3018 |
| Decks | |
| Width/Cutting Deck | 96" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch. |
| Deck Construction | 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat. |
| Blades | 4 Blades at 24.50" Length |
| Dimensions | |
| Width | 101.3 in. (257.0 cm), 72.5 in. @ 3 in. HOC when folded |
| Length | 95.8 in. (243.3 cm) |
| Height | 70.5 in. (179.1 cm) |
| Curb Weight | 2200 |
Accessories and Attachments
Light Kit (not compatible with TC26)
12-Volt Power Port
Floor Mat
Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).
Sun Shade (ROPS)
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
Hydro Maintenance Kit
Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
Harness Add-On Accessory Kit
Take the hassle out of dual accessory fit up with this add-on harness.
KIT 96 RD Baffle
Jack Mount Receiver
RECEIVER-JACK MOUNT - Lazer Diesel
White Non-Marking Side Bumper(requires 3231-7 & 104-8301)
Perfect for restricted and sensitive mowing areas, these durable bumpers eliminate the marking left behind by incidental contact.
Flasher Light Kit
Jack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Extended Drive Lever Kit
Improve your elbow room while you operate with extended drive levers.
Black Side Bumper(requires 3231-7 & 104-8301
Copyright © 2025 - All Rights Reserved - EquipmentLocator.com