Easy, Affordable Financing Available Now!
Apply NowBrillion SS16
SS - 16 Agricultural Seeder SS16
Grass seed is a very expensive commodity. Because of Brillion’s precision placement of seeds, seeding rates can often be cut to nearly half of the rates previously used. In many cases the savings in seed alone will pay for a Sure Stand Seeder in just a short time. Don’t risk your crop to another system. Don’t settle fo... + Read More
Features
Sure Stand Seeder…16 Feet in Every Pass
- Seeding Width is 16’ – The Widest Non-Folding Seeder Offered by Brillion
- Available in Pull-Type or Three-Point Hitch Configurations
- Transport Width is 18’2”
- Heavy-duty All Welded Structural Steel Frame Construction Provides More Weight per Foot on Rollers
- Pulverizer Wheels are 15 ¾” Cast Iron on Front Roller and 11 ½” Cast Iron on Rear Roller
- Pneumatic Down Pressure on Rear Roller
- Positive Ground Driven Seed Metering
- Micro-Meter Seed Box with Meters Spaced at 8”, Capacity of 20 Bushels
- Cat. II, III Free Link or Cat. II, IIIN, III Quick Coupler Three-Point Hitch
- Cat. II or III Pull-Type Hitch
- (4) 11L x 15-12 Ply Transport Tires on Pull-Type Models
- Optional S-Tine or Coil Tine Track Remover
- Optional Electronic Acre Meter Kit
- Optional Electric Clutch with Seed Shaft Sensor and Monitor
- Scale Ready
- LED Warning Lights and SMV Emblem
- Powder Coat Paint
Specs
| Model | SS16 |
| Approximate Weight | 6,757 lbs. (3,065 kg) |
| Working Width | 16 ft. 0 in. (4.8 m) |
| Transport Width | 18 ft. 2 in. (5.5 m) |
| Transport Height | 6 ft. 0 in. (1.8 m) |
| Transport Length | 16 ft. 2 in. (4.9 m) |
| Road Clearance | 13 in. (330 mm) |
| Working Overall Height | 4 ft. 9 in. (1.4 m) |
| Working Overall Length | 17 ft. 0 in. (5.2 m) |
| Seed Box | All Steel Construction with Cover |
| Seed Box Capacity (Micro-Meter) | 20 bu. |
| Seed Meters | "Micro-Meter" |
| Seed Meter Drive | Ground Driven |
| Seed Meter/Opening Spacing | 8 in. (203 mm) |
| Seed Delivery | Broadcast with Wind Deflector Tray |
| Pulverizer Roller - Front | 15.75 in. (400 mm) Cast Iron |
| Pulverizer Roller - Rear | 11.5 in. (292 mm) Cast Iron |
| Pulverizer Axle Bearings | 1.75 in. (45 mm) Flange Bearing Sealed |
| Pulverizer Axle Size - Front | 12.75 in. (324 mm) |
| Pulverizer Axle Size - Rear | 8.625 in. (219 mm) |
| Hitch Type | Drawbar with Hydraulic Transport |
| Hitch Category | Cat. II, III |
| Tire Size | (4) 11L x 15, 12 Ply Implement Rib |
| S-Tine Wheel Track Remover | Optional |
| Coil Tine Wheel Track Remover | Optional |
| Electronic Acre Meter | Optional |
| Electric Clutch with Seed Shaft Sensor and Monitor | Optional |
| Seed Box Scale System | Optional |
| Safety Warning Lights & SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Powder Coat Paint, Red | Standard |
| Horsepower Requirements | 6 to 8 HP (4.5 to 6 kW) per ft. |
| Required Three-Point Hitch Lift Capacity | N/A |
| Recommended Operating Speed | 4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions |
Copyright © 2024 - All Rights Reserved - EquipmentLocator.com